Four external 1000BASE-T ports for making 10/100/1000 Mbps connections to a backbone, end stations, and servers
14 internal full-duplex Gigabit ports to connect to Intel® Server Compute Blades
Spanning Tree Algorithm (STA) protocol for creation of alternative backup paths and prevention of network loops
Simple network management protocol (SNMP) version 1
Fully configurable either in-band or out-of-band control through SNMP-based software
Flash memory for software upgrades [through trivial file (TFTP) or hypertext transfer protocol (HTTP) Web interfaces]
Built-in SNMP management

 

Integrated Chassis management and KVM switch
Fourteen internal full-duplex Gigabit ports to connect to Compute Blades per Gigabit switch
CD-ROM and floppy arbitration and control
Blower and power status and control
Switch fabric configuration and status
Management LAN access
Hot-pluggable for easy service
Optional Redundant Management Module

 

2-Gb Fibre Channel Host Bus Adapter
Two independent channels of 2-Gb Fibre Channel
Eliminates traditional host bottlenecks that impede 2-Gb FC performance
Unique, single-integrated Fibre Channel controller for added reliability and optimum performance
Concurrent support for SCSI and IP protocols
Applications: data warehousing, high-availability environments, LAN-free backup, server and storage consolidation, remote backup

 

Hot-pluggable for fast, easy service
Support for two Intel Xeon 2.4GHz processors
533 MHz front-side bus with 512 KB L2 cache
1 GB ( 2 X 512MB )Reg. ECC SDRAM, PC2100 memory, maximum 8 GB, supporting Intel x 4 Single Device Data Correction
40GB ( 5400RPM/2.5" / Enhanced Firmware ) ATA 100 Hard Drive
Dual integrated network environment support
Internal and external storage expansion capabilities
Light-guided diagnostics
On-board management controller
Integrated ATA-100 IDE, embedded RAID-0/RAID-1 mirroring
Optional SCSI storage expansion unit with embedded RAID-1

 

Industry’s lowest switch latency for extreme performance
Fabric-ready out of the box
Full FC-SW-2 E_Port switch support for heterogeneous SANs
Includes I/O Stream Guard™, non-blocking full-bandwidth architecture, and no-wait routing for maximum performance
FCIA SANmark™-certified for interoperability with servers, storage, switches, and software

 

Hot-pluggable for fast, easy service
Support for two Intel Xeon 2.4GHz processors 533 MHz front-side bus with 512 KB L2 cache
1 GB ( 2 X 512MB )Reg. ECC SDRAM, PC2100 memory, maximum 8 GB, supporting Intel x 4 Single Device Data Correction
Seagate Cheetah 36GB Ultra 320 SCA 80 pin 10KRPM Hard Drive
Dual integrated network environment support
Internal and external storage expansion capabilities
Light-guided diagnostics
On-board management controller
SCSI storage expansion unit with embedded RAID-1

 

Fourteen HotPlug Compute Blade slots
Two 1400W Hot-Swap Power modules for 1+1 reduncancy.
Can be expanded with two extra power modules for 2+2 redundancy.( Option )
Up to two Hot Plug management module bays (Supports Remote Management through a 10/100 Mbit Ethernet connection)
Up to two Hot Plug 1 Gbit Ethernet four-port switch modules and two Hot Plug switch modules of another network-communication standard, such as Fibre Channel
Two Redundant variable-speed Hot Swap blowers, 325 cubic ft per min(CFM),front to back airflow
3.5" floppy disk drive and IDE CD-ROM drive
USB 1.1 port

 

The high performance blade server for enterprise, data center and HPC applications
Features high-performance Intel's Xeon Processors
Power Saving LV Xeon Processors
Significant saving on expensive data center raised floor spcae
Easy to service and maintain, saving on IT service and maintenance
Accommodates up to 10 independent Dual Intel® Xeon™ Server Blades in a 4U chassis with integrated switch blades and management blades
Delivering up to 100 Intel Xeon Servers per Rack
Modular design help to reduce the total cost of ownership.
Significant saving on the expensive data center raised floor space
Significant saving on power consumption
Breakthrough levels of manageability delivered by Amphus’ ManageSite™ Solution
Reduce weight by up to 2.6 times per server Ideal for “Front-End Data Center Applications”, Applications Servers and Compute Cluster Applications
Dual Gigabit Ethernet-Switch Blades enable
-10:1 Ethernet cable consolidation; eliminating the cable management problem for IT administrators
-Separation of front-end client traffic from back-end storage traffic
3+1 1800 Watts (Maximum) Redundant Power Supplies; designed for peak power consumption
Dual Fan modules with dual open blow each module
All blades, power supplies and fan modules are hot-swappable
Inherent Scalability and Serviceability by virtue of modular bladed design and hot-swappability
High Availability built-in multiple server blades, dual switch blades, management blades, power supplies, fan modules and 3+1 power supplies: means no single point of failure
Support Linux and Windows 2000 and Windows server 2003
Lowest TCO high performance platform for data centers and high performance computing

The high performance blade server for enterprise, data center and HPC applications
Features high-performance Intel's Xeon Processors
Power Saving LV Xeon Processors
Significant saving on expensive data center raised floor spcae
Easy to service and maintain, saving on IT service and maintenance
Accommodates up to 10 independent Dual Intel® Xeon™ Server Blades in a 4U chassis with integrated switch blades and management blades
Delivering up to 100 Intel Xeon Servers per Rack
Modular design help to reduce the total cost of ownership.
Significant saving on the expensive data center raised floor space
Significant saving on power consumption
Breakthrough levels of manageability delivered by Amphus’ ManageSite™ Solution
Reduce weight by up to 2.6 times per server Ideal for “Front-End Data Center Applications”, Applications Servers and Compute Cluster Applications
Dual Gigabit Ethernet-Switch Blades enable
-10:1 Ethernet cable consolidation; eliminating the cable management problem for IT administrators
-Separation of front-end client traffic from back-end storage traffic
3+1 1800 Watts (Maximum) Redundant Power Supplies; designed for peak power consumption
Dual Fan modules with dual open blow each module
All blades, power supplies and fan modules are hot-swappable
Inherent Scalability and Serviceability by virtue of modular bladed design and hot-swappability
High Availability built-in multiple server blades, dual switch blades, management blades, power supplies, fan modules and 3+1 power supplies: means no single point of failure
Support Linux and Windows 2000 and Windows server 2003
Lowest TCO high performance platform for data centers and high performance computing
 

The high performance blade server for enterprise, data center and HPC applications
Features high-performance Intel's Xeon Processors
Power Saving LV Xeon Processors
Significant saving on expensive data center raised floor spcae
Easy to service and maintain, saving on IT service and maintenance
Accommodates up to 10 independent Dual Intel® Xeon™ Server Blades in a 4U chassis with integrated switch blades and management blades
Delivering up to 100 Intel Xeon Servers per Rack
Modular design help to reduce the total cost of ownership.
Significant saving on the expensive data center raised floor space
Significant saving on power consumption
Breakthrough levels of manageability delivered by Amphus’ ManageSite™ Solution
Reduce weight by up to 2.6 times per server Ideal for “Front-End Data Center Applications”, Applications Servers and Compute Cluster Applications
Dual Gigabit Ethernet-Switch Blades enable
-10:1 Ethernet cable consolidation; eliminating the cable management problem for IT administrators
-Separation of front-end client traffic from back-end storage traffic
3+1 1800 Watts (Maximum) Redundant Power Supplies; designed for peak power consumption
Dual Fan modules with dual open blow each module
All blades, power supplies and fan modules are hot-swappable
Inherent Scalability and Serviceability by virtue of modular bladed design and hot-swappability
High Availability built-in multiple server blades, dual switch blades, management blades, power supplies, fan modules and 3+1 power supplies: means no single point of failure
Support Linux and Windows 2000 and Windows server 2003
Lowest TCO high performance platform for data centers and high performance computing